衡準實業有限公司

BALANCES EXACT INDUSTRY CO.,LTD.

GENERAL MEASURE






  • Model：BEI-9383 Master / BEI-9383 Slave 
  • Rail type weight signal converter.
  • Applicable to all resistance strain gauges and heavy duty weight sensors.
  • High-speed weight signal converter：BEI-9383M is a serial master, BEI-9383S is a system slave (single-machine can be used as a stand-alone weight signal converter).
  • Has per second：100 high-speed sampling.
  • Resolution：1/100,000.
  • High sensitivity：0.125μV/d.
  • The display update rate is up to 40 times per second.
  • Release instructions and human-machine interface, PLC and human-machine connection.
  • The light signal indicates that the current weighing status is quickly interpreted.
  • Multiple slaves can be connected in series with the host and up to 12 can be connected.
  • Standard RS232 and RS485 dual output architecture, can connect PLC and man-machine at the same time.
  • The host also has independent RS-232 or RS-485 Modbus and 9pin D-type output.
  • Power supply：DC18 ~ 36V.
  • Rail mounting：35mm.


  • Model：BEI-9327U
  • Binary code decimal output converter.
  • Has per second：100 high-speed sampling.
  • Resolution：1/100,000.
  • High sensitivity：0.125μV/d.
  • Fast dynamic weighing and zero tracking stabilization.
  • Fast dynamic weighing seconds and zero tracking seconds setting function.
  • The display update rate is up to 50 times per second.
  • A set of communication RS-232 Modbus RTU read and write.
  • Standard parallel BCD output, optional binary BIN.
  • Positive logic, negative logic interpretation choice.
  • 20mA current loop Current Loop output.
  • The release command is linked to the human machine and PLC.
  • 3 points input, can be customized - zero, deduction, deduction, gross weight / net weight, current ring printing.
  • Power supply：DC18 ~ 36V.
  • Rail mounting：35mm.
  • It can be applied to weight signal conversion such as rapid measurement and checkweigher.


  • Model：BEI-9372
  • With display weight signal converter.
  • With display weight signal converter.
  • Has per second: 100 high-speed sampling.
  • Resolution：1/50,000.
  • Sensitivity：0.25 μV/d.
  • 2 points (IN1, IN2) input, which can be customized.
  • 2-point (SP1, SP2) optical coupling transistor output.
  • The display update rate is up to 20 times per second.
  • Fast dynamic weighing and zero tracking stabilization.
  • The release command and the man-machine interface, PLC connection.
  • The light signal indicates that the current weighing status is quickly interpreted.
  • Power supply 24VDC/35mm rail mounting.
  • Communication module RS232, RS485 Modbus RTU (optional).
  • Analog output module 0-5V, 0-10V, 4-20mA (optional).